CURTAIN SHIELD AIRBAG ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY


  1. Install the curtain shield airbag assembly with the 2 clips and 9 new bolts.

    Torque:
    11 N*m{ 110 kgf*cm , 8 ft.*lbf }



    C110480E01

    NOTICE:
    Do not twist the curtain shield airbag assembly when installing it.

  1. Connect the connector.

    NOTICE:
    When handling the airbag connector, take care not to damage the airbag wire harness.



2. INSTALL ROOF HEADLINING ASSEMBLY
(Click here)

HINT:
Refer to the procedures from "INSTALL ROOF HEADLINING ASSEMBLY".



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


4. PERFORM INITIALIZATION


5. INSPECT SRS WARNING LIGHT