INTAKE MANIFOLD > REASSEMBLY

for Preparation Click here



1. INSTALL VACUUM SWITCHING VALVE ASSEMBLY (VSV FOR ACIS)


A106430

  1. Install the VSV to the vacuum tank with the screw.

    Torque:
    1.4 N*m{ 14 kgf*cm , 12 in.*lbf }



2. INSTALL INTAKE AIR CONTROL VALVE ASSEMBLY


A106432

  1. Install the valve with the 6 bolts.

    Torque:
    8.5 N*m{ 87 kgf*cm , 75 in.*lbf }



3. INSTALL INTAKE MANIFOLD SUB-ASSEMBLY UPPER


  1. Install a new gasket and the manifold upper to the manifold lower with the 14 bolts and 6 nuts.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }



    A106429E02



4. INSTALL INTAKE AIR CONTROL VALVE ACTUATOR


A106428

HINT:
Before installing the actuator, adjust the intake air control valve to the fully closed position.

  1. Install a new gasket and the actuator with the 3 nuts.

    Torque:
    8.5 N*m{ 87 kgf*cm , 75 in.*lbf }



5. INSTALL VACUUM CONTROL VALVE SET


A106427

  1. Install the vacuum control valve set with the 2 nuts.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }

  1. Connect the 2 vacuum hoses to the manifold and clamp.

  1. Connect the VSV connector.

  1. Install the harness clamp to the manifold with the bolt.

    Torque:
    7.5 N*m{ 76 kgf*cm , 66 in.*lbf }

  1. Connect the vacuum hose to the air control valve actuator.