DTC    01-E0    Registration Complete Indication Error (CAMERA)

DTC    01-E3    Registration Demand Transmission (CAMERA)

for Preparation Click here


DESCRIPTION


DTC No.
DTC Detection Condition
Trouble Area
01-E0
When "Registration complete" command from master device cannot be received
-
01-E3
Registration demand command from slave device is output, or the registration demand command is output by receiving connection confirmation command from sub-master device
-

HINT:
Even if no failure is detected, this code may be stored depending on the battery condition or voltage for starting the engine.


INSPECTION PROCEDURE

This DTC code is not related to the malfunction.