METER / GAUGE SYSTEM > FAIL-SAFE CHART

for Preparation Click here

WATER TEMPERATURE GAUGE:
Condition	Fail-safe Operation	Fail-safe Deactivation Condition
Water temperature data is interrupted for 5 seconds	Gauge needle indicates below "C"	Water temperature data is received

FUEL SIGNAL (FUEL INJECTION SIGNAL):
Condition	Fail-safe Operation	Fail-safe Deactivation Condition
While engine switch is in on (IG) position, fuel injection signal is interrupted for 60 seconds	Fuel gauge calibration is performed using average fuel consumption data	Engine switch is turned from off to on (IG) and normal data is received

FUEL SIGNAL (GAUGE SIGNAL):
Condition	Fail-safe Operation	Fail-safe Deactivation Condition
While engine switch is in the on (IG) position, sender signal is interrupted for 60 seconds and malfunction signal is received from one of gauges for 10 to 20 seconds	Needle indicates "E", and warning light comes on	Engine switch is turned from off to on (IG) and normal data is received

SHIFT INDICATOR:
Condition	Fail-safe Operation	Fail-safe Deactivation Condition
"P to D" data is interrupted for 3 seconds	All indicators go off	Normal data is received
"S" data is interrupted for 3 seconds	"S" indicator goes off	Normal data is received

GEAR POSITION INDICATOR (1 TO 6):
Condition	Fail-safe Operation	Fail-safe Deactivation Condition
Gear position data is interrupted for 3 seconds or malfunction signal is received	Indicator goes off	Normal data is received

ABS and BRAKE:
Condition	Fail-safe Operation	Fail-safe Deactivation Condition
ABS and brake data is interrupted for 10 seconds	Warning light comes on	Normal data is received

DOOR:
Condition	Fail-safe Operation	Fail-safe Deactivation Condition
Regular data is interrupted	Data received most recently remains displayed	Normal data is received

TAIL:
Condition	Fail-safe Operation	Fail-safe Deactivation Condition
Regular data is interrupted	Data received most recently remains displayed	Normal data is received

BEAM:
Condition	Fail-safe Operation	Fail-safe Deactivation Condition
Regular data is interrupted for 10 seconds or more	Indicator goes off	Normal data is received

TAIL OR HEAD:
Condition	Fail-safe Operation	Fail-safe Deactivation Condition
Regular data is interrupted for 10 seconds or more	Indicator goes off	Normal data is received

FR FOG:
Condition	Fail-safe Operation	Fail-safe Deactivation Condition
Regular data is interrupted for 10 seconds or more	Indicator goes off	Normal data is received

RR FOG:
Condition	Fail-safe Operation	Fail-safe Deactivation Condition
Regular data is interrupted for 10 seconds or more	Indicator goes off	Normal data is received

AIRBAG:
Condition	Fail-safe Operation	Fail-safe Deactivation Condition
Airbag data is interrupted for 10 seconds or there is malfunction in the meter's internal CPU	Warning light comes on	Normal data is received

OUTSIDE TEMP:
Condition	Fail-safe Operation	Fail-safe Deactivation Condition
Abnormal data and sensor malfunctioning data are received	"--°F" is displayed	Normal data is received
Outside temperature data is interrupted for 10 seconds	"E" is displayed	Normal data is received

MULTI-INFORMATION:
Condition	Fail-safe Operation	Fail-safe Deactivation Condition
Cruise information data is interrupted for 60 seconds	Display becomes blank (only measurement units are displayed)	Normal data is received

LIGHT CONTROL RHEOSTAT:
Condition	Fail-safe Operation	Fail-safe Deactivation Condition
Rheostat data is interrupted for 10 seconds or abnormal data is received	Display remains in daytime mode	Normal data is received