FRONT STEREO COMPONENT SPEAKER > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE SPEAKER HOLE COVER


    B105661E04

  1. Using a screwdriver, detach the 4 clips and remove the hole cover.

    HINT:
    Tape the screwdriver tip before use.



3. REMOVE FRONT STEREO COMPONENT SPEAKER ASSEMBLY


    E107388

  1. Remove the 2 bolts.

  1. Disconnect the connector and remove the speaker.

    HINT:
    Do not touch the cone part of the speaker.