STEREO COMPONENT AMPLIFIER > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT


3. REMOVE LUGGAGE COMPARTMENT COVER RH


4. REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY WITH AMPLIFIER BRACKET



E108519E01

  1. Disconnect the connectors.

  1. Remove the 3 nuts and amplifier with bracket.



5. REMOVE NO. 2 AMPLIFIER BRACKET


    E108517E01

  1. Remove the 2 screws and bracket.



6. REMOVE NO. 1 AMPLIFIER BRACKET


    E108518E01

  1. Remove the 2 screws and bracket.



7. REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY