MASS AIR FLOW METER > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE COOL AIR INTAKE DUCT SEAL


A105932E01

  1. Remove the 7 clips and duct seal.



3. REMOVE ENGINE ROOM SIDE COVER RH


A105933E01

  1. Loosen the nut and remove the 2 clips and side cover.



4. REMOVE MASS AIR FLOW METER


A107200

  1. Disconnect the MAF meter connector.

  1. Remove the 2 screws and MAF meter.

  1. Remove the O-ring from the MAF meter.