INJECTOR DRIVER > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE COOL AIR INTAKE DUCT SEAL


A105932E01

  1. Remove the 7 clips and duct seal.



3. REMOVE AIR CLEANER INLET


A107673

  1. Remove the bolt and air cleaner inlet.



4. REMOVE NO.1 ENGINE COVER


A105311

  1. Disconnect the 4 connectors.

  1. Remove the 3 clips and cover.



5. REMOVE INJECTOR DRIVER


A105899

  1. Remove the bolt, 2 nuts and injector driver.

    NOTICE:
    Be careful not to drop or strike the injector driver.