FUEL PUMP RESISTOR > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE COOL AIR INTAKE DUCT SEAL


    A105932E01

  1. Remove the 7 clips and duct seal.



3. REMOVE ENGINE ROOM SIDE COVER RH


    A105933E01

  1. Loosen the nut and remove the 2 clips and side cover.



4. REMOVE FUEL PUMP RESISTOR


A111525

  1. Disconnect the connector and clamp from the fuel pump resistor.

  1. Remove the 2 bolts and fuel pump resistor, and disconnect the ground wire.