STEERING PAD SWITCH CABLE > INSPECTION

for Preparation Click here



1. INSPECT STEERING PAD SWITCH CABLE SUB-ASSEMBLY



E107600E01

  1. Measure the resistance of the cable assembly.

    Standard resistance:
    Tester Connection
    		Specified Condition
    1 (ILL+2) - 1 (ILL+2)
    		Below 1 Ω
    4 (AU2) - 4 (AU2)
    		Below 1 Ω
    2 (EAU) - 2 (EAU)
    		Below 1 Ω
    3 (EAU) - 3 (EAU)
    		Below 1 Ω

    If the result is not as specified, replace the cable.