FRONT SEAT SIDE AIRBAG ASSEMBLY > ON-VEHICLE INSPECTION

for Preparation Click here



1. FRONT SEAT SIDE AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)

  1. Perform a diagnostic system check (Click here).



    C106385

  1. With the front seat side airbag assembly installed on the vehicle, perform a visual check. If there are any defects as mentioned below, replace the front seat assembly with a new one:

    1. Cuts, minute cracks or marked discoloration on the front seatback assembly around the front seat airbag assembly.



2. FRONT SEAT SIDE AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)

  1. Perform a diagnostic system check (Click here).



    C107069

  1. With the front seat side airbag assembly removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the front seat side airbag assembly with a new one:

    1. Cuts, minute cracks or marked discoloration on the front seat side airbag assembly.
    2. Cracks or other damage to the wire harness or connector.

    CAUTION:
    For removal and installation procedures of the front seat side airbag assembly. Be sure to follow the correct procedure.