CENTER AIRBAG SENSOR ASSEMBLY > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT CENTER AIRBAG SENSOR ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)

  1. Perform a diagnostic system check (Click here).



2. INSPECT CENTER AIRBAG SENSOR ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)

  1. Perform a diagnostic system check (Click here).



3. INSPECT CENTER AIRBAG SENSOR ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED)

  1. Replace the front airbag sensor.

    CAUTION:
    For removal and installation procedures of the front airbag sensor. Be sure to follow the correct procedure.

    HINT:
    The front airbag sensor should be replaced after any of the airbags has deployed, as it has been subjected to the impact.