FRONT WIPER RUBBER > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedures for both the RH and LH sides.
  1. The procedures listed below are for the LH side.



1. INSTALL WIPER RUBBER


E059361E04

  1. Install the 2 wiper rubber backing plates to the wiper rubber.

    NOTICE:
    Install the backing plates facing the correct direction.



    B108990E01

  1. Install the wiper rubber to the claw of the wiper blade in the direction indicated by the arrow in the illustration.

    HINT:
    Install the wiper rubber so that the head part (large side) of the wiper rubber faces the arm axle side.



  1. Attach the head part (large side) of the wiper rubber to the rear end side claw of the wiper blade.

    NOTICE:
    B108989E02
    Push the wiper blade into the grooves of the wiper rubber to attach them completely.



2. INSTALL FRONT WIPER BLADE


    B108988E01

  1. Attach the claw to install the wiper blade.