FRONT WIPER RUBBER > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedures for both the RH and LH sides.
  1. The procedures listed below are for the LH side.



1. REMOVE FRONT WIPER BLADE


    B108986E01

  1. Detach the claw as shown in the illustration.



    B108987E01

  1. Remove the wiper blade as shown in the illustration.

    NOTICE:
    Do not fold the wiper arm with the wiper blade removed. The arm tip may damage the windshield surface.



2. REMOVE WIPER RUBBER


    B108989E01

  1. Detach the head part (large side) of the wiper rubber from the wiper blade.



    B108991E01

  1. Remove the wiper rubber in the direction indicated by the arrow in the illustration.

    NOTICE:
    Do not pull out the wiper rubber forcibly. Doing so will deform the backing plate or damage the blade claw.

  1. Remove the 2 wiper rubber backing plates from the wiper rubber.