AIR CONDITIONING UNIT > DISASSEMBLY

for Preparation Click here



1. REMOVE AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY


    E107632E01

  1. Remove the packing from the A/C tube.



    E107633

  1. Using a 4 mm hexagon wench, remove the 2 hexagon bolts and A/C tube.

  1. Remove the 2 O-rings from the A/C tube.



2. REMOVE COOLER EXPANSION VALVE


    E107634

  1. Remove the cooler expansion valve from the cooler evaporator.



3. REMOVE AIR OUTLET CONTROL SERVOMOTOR RH


E107625

  1. Disconnect the connector.

  1. Remove the 3 screws and servomotor.



4. REMOVE AIR MIX CONTROL SERVOMOTOR RH


    E107626E01

  1. Remove the 3 clamps and connector and disconnect the wire harness.



    E107656

  1. Remove the 2 screws and heater piping cover.



    E107627

  1. Remove the 3 screws and air servomotor.



5. REMOVE AIR CONDITIONING HARNESS ASSEMBLY


    E107628E01

  1. Disconnect the 2 connectors and detach the 2 clamps.



    E107630E01

  1. Detach the 4 clamps and then disconnect the wire harness.

  1. Remove the A/C harness as shown in the illustration.



6. REMOVE AIR OUTLET CONTROL SERVOMOTOR LH


    E110223E01

  1. Remove the 2 screws and air duct.



    E107629

  1. Remove the 4 screws and servomotors.



    E074809E01

  1. Remove the 3 screws.

  1. Detach the claw and remove the air outlet control servomotor.



7. REMOVE AIR MIX CONTROL SERVOMOTOR LH


    E074810E02

  1. Remove the 3 screws.

  1. Release the claw and remove the servomotor.



8. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY


    E107631

  1. Remove the screw and clamp.

  1. Remove the radiator unit.



9. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY


    E107635E01

  1. Remove the 5 screws.

  1. Release the 3 claws and remove the air duct case.



    E107636

  1. Remove the cooler evaporator from the heater case.

  1. Remove the 2 O-rings from the cooler evaporator.