BLOWER UNIT > DISASSEMBLY

for Preparation Click here



1. REMOVE DAMPER SERVO SUB-ASSEMBLY


    E107641E01

  1. Detach the claw and remove the lever.



    E107642

  1. Remove the 2 screws and damper servo.



2. REMOVE CLEAN AIR FILTER


    E107643E01

  1. Detach the 2 claws and remove the air filter.

    HINT:
    Be sure to turn the engine switch on (IG) and set the A/C to RECIRCULATION mode before removing the air filter.



3. REMOVE COOLING UNIT WITH FAN MOTOR SUB-ASSEMBLY


    E107644

  1. Remove the 3 screws and fan motor.