LUMBAR SUPPORT ADJUSTER ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT LUMBAR SUPPORT ADJUSTER ASSEMBLY LH AND RH


B065478E03

  1. Check operation of the lumbar support adjuster.

    1. Check if the lumbar support adjuster moves smoothly when the battery is connected to the lumbar support adjuster motor connector terminals.

      OK:
      Measurement Condition
      		Operation Direction
      Battery positive (+) → 1
      Battery negative (-) → 2
      		Clockwise
      Battery positive (+) → 2
      Battery negative (-) → 1
      		Counterclockwise

      If the result is not as specified, replace the lumbar support adjuster assembly.