PRE-CRASH SAFETY SYSTEM > DTC CHECK / CLEAR



CHECK DTC
A109951E01

  1. Check the DTCs.

    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Check the DTCs by following the prompts on the tester screen.

      HINT:
      Refer to the intelligent tester operator's manual for further details.

  2. Clear the DTCs.

    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Clear the DTCs by following the prompts on the tester screen.

      HINT:
      Refer to the intelligent tester operator's manual for further details.