PARK / NEUTRAL POSITION SWITCH > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY

  1. Apply the parking brake and turn the engine switch on (IG).

  1. Depress the brake pedal and check that the engine starts when the shift lever is set in the N or P position, but does not start in other positions.

  1. Check that the back-up light comes on and the reverse warning buzzer sounds when the shift lever is set in the R position, but do not function in other positions.
    If a failure is found, check the park/neutral position switch for continuity.