SEAT BELT CONTROL ECU > INSTALLATION

for Preparation Click here



1. INSTALL SEAT BELT CONTROL ECU


    B111673E02

  1. Attach the claw of the ECU stay to install the junction block.

  1. Install the nut.

  1. Connect the connector.



    B109363E01

  1. Install the ECU with the 3 nuts.



2. INSTALL LUGGAGE COMPARTMENT TRIM SIDE COVER INNER LH


B109034

  1. Install the trim cover with the 3 clips.



3. INSTALL LUGGAGE COMPARTMENT TRIM COVER FRONT


B107126E02

  1. Attach the 4 claws to install the trim cover.



    B110183

  1. Attach the 2 hook.



    B110747

  1. Install the 2 hooks.



4. INSTALL REAR FLOOR FINISH PLATE


B107125E03

  1. Attach the 4 clips to install the finish plate.

  1. Install the 3 clips labeled A.



5. INSTALL TOOL BOX


B109030


6. INSTALL LUGGAGE COMPARTMENT FLOOR MAT


B109029


7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


8. CHECK SRS WARNING LIGHT

  1. Check the SRS warning light (Click here).



9. PERFORM INITIALIZATION

  1. Perform initialization (Click here).

    NOTICE:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.