MASS AIR FLOW METER > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE COOL AIR INTAKE DUCT SEAL


    A110865E01

  1. Remove the 7 clips and intake duct seal.



3. REMOVE ENGINE ROOM SIDE COVER RH


    A110866E01

  1. Remove the nut, 2 clips and side cover.



4. REMOVE V-BANK COVER

  1. Remove the 2 nuts and V-bank cover.



5. REMOVE MASS AIR FLOW METER


    A107650

  1. Disconnect the MAF meter connector.

  1. Remove the 2 screws and MAF meter.

  1. Remove O-ring from the MAF meter.