CRANKSHAFT POSITION SENSOR > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE OIL FILTER ELEMENT SERVICE HOLE COVER


    A106639

  1. Remove the 6 screws and open the service hole cover.



3. REMOVE CRANKSHAFT POSITION SENSOR


    A106635

  1. Disconnect the sensor connector.

  1. Remove the bolt and sensor.