THEFT DETERRENT SYSTEM > CUSTOMIZE PARAMETERS



CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE)

HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function(s) can be customized.
  2. Be sure to make a note of the current setting before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.


Theft deterrent system: 
Display (Item)
Default
Contents
Setting
Warn by Horn
(Warning by horn)
ON
Function that allows vehicle horns and theft deterrent horn to be used as warning device
ON/OFF
Passive Mode
(Passive arming mode)
OFF
Passive mode is function that switches theft deterrent system from arming preparation state to armed state 30 seconds after key is not inside vehicle and driver side door is closed
In passive mode, theft deterrent system will judge that theft is taking place and switch to alarm sounding state if one of following operations are not performed within 14 seconds (see entry delay below) after door is opened:
  1. Unlock any door by key or wireless operation
  2. Reconnect battery
  3. Turn the engine switch on (IG)
ON/OFF
Entry Delay
(Entry delay time)
14s
Function that changes entry delay time (time before warning starts) for PASSIVE MODE
0 s/14 s/ 30 s