THEFT DETERRENT SYSTEM > DATA LIST / ACTIVE TEST



READ DATA LIST

HINT:
Using the intelligent tester's Data List allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the Data List early in troubleshooting is one way to save time.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Read the Data List.


Engine room No. 2 relay block, junction block (front controller): 
Item
Measurement Item/ Display (Range)
Normal Condition
Diagnostic Note
Hood Courtesy SW
Hood courtesy switch/
ON or OFF
ON: Engine hood is open
OFF: Engine hood is closed
-

PERFORM ACTIVE TEST

HINT:
Performing the intelligent tester's Active Test allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the Active Test early in troubleshooting is one way to save time. The Data List can be displayed during the Active Test.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Perform the Active Test by following the directions on the tester screen.

    Multiplex network body ECU: 
    Item
    		Test Details
    		Diagnostic Note
    Security Horn (TC/ON)
    		Security horn ON/OFF
    		-
    Security Indic
    		Security indicator ON/OFF
    		-
    Security Horn*
    		Theft warning siren ON/OFF
    		-

    HINT:
    *: Europe, Russia, Turkey and China