PRE-CRASH SAFETY SYSTEM > FAIL-SAFE CHART



HINT:
The pre-crash safety system fail-safe function and details are indicated in the table below.

Cause
Warning message
Fail-safe Operation
Conditions to return to normal condition
A malfunction exists in pre-crash safety system
"Check PCS " to "PCS DISABLED Now"
Depending on malfunction part, pre-crash seat belt or brake assist system may stop operating*2
Repair malfunctioning part
Radiator grille or millimeter wave radar sensor is dirty
"PCS DISABLED Now"
Depending on dirty part, pre-crash seat belt or brake assist system may stop operating*2
Clean radiator grille or millimeter wave radar sensor
Pre-crash sensor cannot detect possible crash object because of bad weather, such as snow
"PCS DISABLED Now"
Depending on dirty part, pre-crash seat belt or brake assist system may stop operating*2
Sensor can detect an object
Overheating prevention function of seat belt control ECU operates*1
"PCS DISABLED Now"
Pre-crash seat belts
Temperature of seat belt goes down, and seat belt control ECU becomes operative

HINT:
  1. *1: The overheating prevention function operates when the seat belt control ECU detects a rise in seat belt temperature because of excessive seat belt operation.
  2. *2: The pre-crash seat belts operate only with sudden braking.