GENERATOR > REASSEMBLY

for Preparation Click here



1. INSTALL GENERATOR PULLEY WITH CLUTCH


B057312E04

  1. Install the pulley by hand.

  1. Install SST to the pulley and vise as shown in the illustration.

    SST
    09820-63020  



    A074018E02

  1. Turn SST (B) counterclockwise to tighten the pulley.

    Torque:
    110 N*m{ 1,122 kgf*cm , 81 ft.*lbf }

  1. Check that the generator pulley rotates smoothly.

  1. Install the generator pulley cap.