STEERING CONTROL ECU > INSTALLATION

for Preparation Click here



1. INSTALL STEERING CONTROL ECU


    C110351E01

  1. Install the steering control ECU with the 3 screws.

    HINT:
    1. Align positioning boss (A) of the blower assembly with the hole of the steering control ECU.
    2. Securely engage hook (B) of the steering control ECU with the blower assembly.



    C105540

  1. Connect the 3 connectors to the steering control ECU.



2. INSTALL INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.2


B108847E02

  1. Connect the connector and clamp.

  1. Attach the 4 clips to install the under cover.



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


4. PERFORM INITIALIZATION
Some systems need initialization when disconnecting the cable from the negative battery terminal (Click here).


5. PERFORM VARIABLE GEAR RATIO STEERING SYSTEM CALIBRATION
(Click here)