STEERING CONTROL ECU > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
(Click here)


2. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.2


B108847E01

  1. Using a screwdriver, detach the 4 clips.

    HINT:
    Tape the screwdriver tip before use.

  1. Disconnect the connector and clamp, and remove the under cover.



3. REMOVE STEERING CONTROL ECU


    C105540

  1. Disconnect the 3 connectors from the steering control ECU.



    C105541

  1. Remove the 3 screws and the steering control ECU.