FRONT SEAT FRAME WITH ADJUSTER > INSPECTION

for Preparation Click here

1. Check operation of the seat frame (slide motor).
   
   

   1. Check if the seat frame moves smoothly when the battery is connected to the slide motor connector terminals.
      

      OK:

      Measurement Condition	Operational Direction
      Battery positive (+) → 1 Battery negative (-) → 2	Forward
      Battery positive (+) → 2 Battery negative (-) → 1	Backward

      If the result is not as specified, replace the seat frame with adjuster.
      

2. Check operation of the seat frame (front vertical motor).
   
   

   1. Check if the seat frame moves smoothly when the battery is connected to the front vertical motor connector terminals.
      

      OK:

      Measurement Condition	Operational Direction
      Battery positive (+) → 1 Battery negative (-) → 2	Upward
      Battery positive (+) → 2 Battery negative (-) → 1	Downward

      If the result is not as specified, replace the seat frame with adjuster.
      

3. Check operation of the seat frame (lifter motor).
   
   

   1. Check if the seat frame moves smoothly when the battery is connected to the lifter motor connector terminals.
      

      OK:

      Measurement Condition	Operational Direction
      Battery positive (+) → 2 Battery negative (-) → 1	Upward
      Battery positive (+) → 1 Battery negative (-) → 2	Downward

      If the result is not as specified, replace the seat frame with adjuster.
      

4. Check operation of the seat frame (reclining motor).
   
   

   1. Check if the seat frame moves smoothly when the battery is connected to the reclining motor connector terminals.
      

      OK:

      Measurement Condition	Operational Direction
      Battery positive (+) → 2 Battery negative (-) → 1	Forward
      Battery positive (+) → 1 Battery negative (-) → 2	Backward

      If the result is not as specified, replace the seat frame with adjuster.
      

1. Check operation of the seat frame (slide motor).
   
   

   1. Check if the seat frame moves smoothly when the battery is connected to the slide motor connector terminals.
      

      OK:

      Measurement Condition	Operational Direction
      Battery positive (+) → 2 Battery negative (-) → 1	Forward
      Battery positive (+) → 1 Battery negative (-) → 2	Backward

      If the result is not as specified, replace the seat frame with adjuster.
      

2. Check operation of the seat frame (front vertical motor).
   
   

   1. Check if the seat frame moves smoothly when the battery is connected to the front vertical motor connector terminals.
      

      OK:

      Measurement Condition	Operational Direction
      Battery positive (+) → 2 Battery negative (-) → 1	Upward
      Battery positive (+) → 1 Battery negative (-) → 2	Downward

      If the result is not as specified, replace the seat frame with adjuster.
      

3. Check operation of the seat frame (lifter motor).
   
   

   1. Check if the seat frame moves smoothly when the battery is connected to the lifter motor connector terminals.
      

      OK:

      Measurement Condition	Operational Direction
      Battery positive (+) → 1 Battery negative (-) → 2	Upward
      Battery positive (+) → 2 Battery negative (-) → 1	Downward

      If the result is not as specified, replace the seat frame with adjuster.
      

4. Check operation of the seat frame (reclining motor).
   
   

   1. Check if the seat frame moves smoothly when the battery is connected to the reclining motor connector terminals.
      

      OK:

      Measurement Condition	Operational Direction
      Battery positive (+) → 2 Battery negative (-) → 1	Forward
      Battery positive (+) → 1 Battery negative (-) → 2	Backward

      If the result is not as specified, replace the seat frame with adjuster.