MULTIPLEX COMMUNICATION SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



CHECK DTC
A103811E09

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Read the DTCs on the tester screen.

    HINT:
    Refer to the intelligent tester operator's manual for further details.


CLEAR DTC

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Erase the DTCs by following the prompts on the tester screen.

    HINT:
    Refer to the intelligent tester operator's manual for further details.