SEAT BELT WARNING SYSTEM > DATA LIST / ACTIVE TEST

for Preparation Click here



PERFORM ACTIVE TEST

HINT:
Performing the intelligent tester's Active Test allows relays, VSV, actuator and other items to be operated without removing any parts. Performing the Active Test early in troubleshooting is one way to save time. The Data List can be displayed during the Active Test.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Perform the Active Test according to the display on the tester.

    Combination meter assembly: 
    Item
    		Test Details
    		Diagnostic Note
    Indicat. Lamp D-seat Belt
    		Seat belt warning light for driver side / OFF or ON
    		Confirm that vehicle is stopped and engine is idling
    Indicat. Lamp P-seat Belt
    		Seat belt warning light for passenger side / OFF or ON
    		Confirm that vehicle is stopped and engine is idling