REAR SUNSHADE SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



CHECK DTC
A103811E14

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Read the DTCs by following the directions on the tester's screen.

    HINT:
    Refer to the intelligent tester operator's manual for further details.


CLEAR DTC

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Erase the DTCs by following the directions on the tester's screen.

    HINT:
    Refer to the intelligent tester operator's manual for further details.