FRONT SHOCK ABSORBER > INSPECTION

for Preparation Click here



1. INSPECT FRONT SHOCK ABSORBER


    G032926

  1. Compress and extend the front shock absorber rod 4 or more times. Check that there is no abnormal resistance or sound.
    If there is any abnormality, replace the front shock absorber with a new one.

    NOTICE:
    When disposing of the front shock absorber, see DISPOSAL on page Click here.



    C107737E01

  1. Check that there is a difference in the damping force when the rod is positioned as shown. (for AVS)

    NOTICE:
    When disposing of the front shock absorber, see DISPOSAL on page Click here.