FRONT SHOCK ABSORBER > DISASSEMBLY

for Preparation Click here

1. Install the SST to the front coil spring so that the 2 hooks on the SST are fully extended.
   

2. Fully compress the coil spring with the SST.
   

   SST

   09727-30021   (09727-00010, 09727-00021, 09727-00031)
   

   NOTICE:

   Do not use an impact wrench. It will damage the SST.

   HINT:

   The front coil spring can also be installed/removed using the hydraulic spring compressor.

3. Remove the lock nut.
   

4. Remove the actuator support bracket FR. (for AVS)
   

5. Remove the front suspension support sub-assembly with front coil spring insulator upper.
   
   

   1. Remove the front coil spring insulator upper from the front suspension support sub-assembly.
      

   2. Remove the front spring bumper from the front suspension support sub-assembly.
      

6. Remove the front coil spring and SST.
   

   NOTICE:

   Do not use an impact wrench. It will damage the SST.

7. Remove the front coil spring insulator lower.