FRONT STABILIZER BAR > REMOVAL

for Preparation Click here



1. REMOVE FRONT WHEEL


2. REMOVE FRONT STABILIZER LINK ASSEMBLY LH


    C104398E01

  1. Remove the 2 nuts and the front stabilizer link assembly LH.

    HINT:
    If the ball joint turns together with the nut, use a hexagon (6 mm) wrench to hold the stud.



3. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

HINT:
Remove the RH side following the same procedures as with the LH side.



4. REMOVE ENGINE UNDER COVER REAR LH


    C104538E01

  1. Remove the bolt and engine under cover LH.



5. REMOVE ENGINE UNDER COVER REAR RH

HINT:
Remove the RH side following the same procedures as with the LH side.



6. REMOVE FRONT STABILIZER NO.2 BRACKET LH


    G033032

  1. Remove the 2 bolts and the front stabilizer No.2 bracket LH from the front suspension crossmember.



7. REMOVE FRONT STABILIZER NO.2 BRACKET RH

HINT:
Remove the RH side following the same procedures as with the LH side.



8. REMOVE FRONT STABILIZER NO.1 BRACKET LH


    G033356

  1. Remove the 4 bolts and the front stabilizer No.1 bracket LH from the frame.



9. REMOVE FRONT STABILIZER NO.1 BRACKET RH

HINT:
Remove the RH side following the same procedures as with the LH side.



10. REMOVE FRONT STABILIZER BAR NO.1 BUSH

  1. Remove the 2 front stabilizer bar No.1 bushes from the front stabilizer bar.



11. REMOVE FRONT STABILIZER BAR

  1. Remove the front stabilizer bar from the vehicle.