DEFOGGER RELAY > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT RELAY (Marking: DEFOG)


B106753E01

  1. Measure the resistance of the DEFOG relay.

    Standard:
    Tester Condition
    		Specified Condition
    3 - 4
    		Below 1 Ω
    3 - 5
    		10 kΩ or higher
    3 -5
    		Below 1 Ω
    (when battery voltage is applied to terminals 1 and 2)
    If the result is not as specified, replace the relay.