NAME PLATE > INSTALLATION

for Preparation Click here


Heating temperature:
Item
Temperature
Vehicle Body
40 to 60°C (104 to 140°F)
Emblem
20 to 30°C (68 to 86°F)
Name Plate
20 to 30°C (68 to 86°F)

NOTICE:
Do not heat the vehicle body, emblem and name plate excessively.

HINT:
When installing the emblem and name plate, heat the vehicle body, emblem and name plate using a heat light.



1. INSTALL LUGGAGE COMPARTMENT DOOR EMBLEM

  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. If reusing the emblem:
    Clean the emblem.

    1. Using a heat light, heat the emblem.

    2. Remove the double-sided tape from the emblem.

    3. Wipe off any tape adhesive residue with cleaner.

    4. Apply new double-sided tape to the emblem.

  1. Install the emblem.

    1. Using a heat light, heat the vehicle body and emblem.

    2. Remove the peeling paper from the face of the emblem.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.

    3. Install the emblem.



2. INSTALL LUGGAGE COMPARTMENT NO. 1 DOOR NAME PLATE

  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. If reusing the name plate:
    Clean the name plate.

    1. Using a heat light, heat the name plate.

    2. Remove the double-sided tape from the name plate.

    3. Wipe off any tape adhesive residue with cleaner.

    4. Apply new double-sided tape to the name plate.

  1. Install the name plate.

    1. Using a heat light, heat the vehicle body and name plate.

    2. Remove the peeling paper from the face of the name plate.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.

    3. Install the name plate.



3. INSTALL LUGGAGE COMPARTMENT NO. 3 DOOR PLATE

  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. If reusing the door plate:
    Clean the door plate.

    1. Using a heat light, heat the door plate.

    2. Remove the double-sided tape from the door plate.

    3. Wipe off any tape adhesive residue with cleaner.

    4. Apply new double-sided tape to the door plate.

  1. Install the door plate.

    1. Using a heat light, heat the vehicle body and door plate.

    2. Remove the peeling paper from the face of the door plate.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.

    3. Install the door plate.