LIGHTING SYSTEM > AFS OFF Switch Circuit

for Preparation Click here


DESCRIPTION

The AFS OFF switch uses the multiplex communication system. First make sure that the multiplex communication system is functioning normally before performing troubleshooting on the AFS OFF switch.

WIRING DIAGRAM


E109519E01


INSPECTION PROCEDURE

1.READ VALUE OF INTELLIGENT TESTER

  1. Connect the intelligent tester to the DLC3.

  1. Turn the engine switch on (IG) and turn the intelligent tester main switch ON.

  1. Select the items below in the Data List, and read the displays on the intelligent tester.

    Integration control and panel assembly:

    Item
    		Measurement Item / Display (Range)
    		Normal Condition
    		Diagnostic Note
    AFS OFF SW
    		AFS OFF switch / ON or OFF
    		ON: AFS switch ON
    OFF: AFS switch OFF
    		-



NG
REPLACE INTEGRATION CONTROL AND PANEL ASSEMBLY
OK

REPLACE AFS ECU