DTC    B2060    ABS Malfunction


DESCRIPTION

This DTC is output when a malfunction in the brake system is detected. This circuit consists of the skid control ECU assembly, ABS & traction actuator assembly and seat belt control ECU. Signals are sent from the skid control ECU assembly and ABS & traction actuator assembly through CAN communication.

DTC No.
DTC Detection Condition
Trouble Area
B2060
Malfunction in brake system is detected
  1. Electronically controlled brake system
  2. ABS & TRC & VSC & BA with EBD system
  3. Seat belt control ECU

INSPECTION PROCEDURE

NOTICE:
When the seat belt control ECU is replaced with a new one, Active Test must be performed (Click here).

1.CHECK DTC (PRE-CRASH SAFETY SYSTEM)

  1. Delete the DTC (Click here).

  1. Recheck that DTC B2060 is not output.

    OK:
    DTC B2060 is not output.



NG
REPLACE SEAT BELT CONTROL ECU
OK

GO TO ABS & TRC & VSC & BA WITH EBD SYSTEM