SFI SYSTEM > PRECAUTION

for Preparation Click here


NOTICE:
  1. Initialize the following systems after disconnecting and reconnecting the cable from the negative (-) battery terminal.

    System Name
    		See procedure
    Power Window Control System
    		 Click here
    Sliding Roof System
    		 Click here
    Clearance Sensor System
    		 Click here
    Variable Gear Ratio Steering System
    		 Click here
  2. Perform the RESET MEMORY (A/T initialization) operation after replacing the automatic transmission assembly, engine assembly or ECM.

HINT:
RESET MEMORY cannot be completed by only disconnecting the cable from the negative (-) battery terminal.