HOOD > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT HOOD SUB-ASSEMBLY


  1. Check that the clearance measurements of areas A to C are within the standard range.


    B106657E02

    Standard clearance:
    Area
    		Measurement
    A
    		3.7 +- 1.5 mm (0.146 +- 0.059 in.)
    B (Reference)
    		0.5 +- 1.5 mm (0.02 +- 0.059 in.)
    C (Reference)
    		3.7 +- 1.5 mm (0.146 +- 0.059 in.)