FRONT DOOR > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT FRONT DOOR PANEL SUB-ASSEMBLY LH


  1. Check that the clearance measurements of areas A to H are within the standard range.


    B109719E01


    Standard clearance:

    Area
    		Measurement
    		Area
    		Measurement
    A
    		4.0 +- 1.5 mm (0.157 +- 0.059 in.)
    		C
    		4.85 +- 1.5 mm (0.191 +- 0.059 in.)
    B
    		0 +- 1.5 mm (0 +- 0.059 in.)
    		D
    		1.95 +- 1.5 mm (0.077 +- 0.059 in.)
    E
    		5.0 +- 1.5 mm (0.197 +- 0.059 in.)
    		F
    		0 +- 1.5 mm (0 +- 0.059 in.)
    G
    		4.0 +- 1.5 mm (0.157 +- 0.059 in.)
    		H
    		0 +- 1.5 mm (0 +- 0.059 in.)