LUGGAGE COMPARTMENT DOOR > REMOVAL |
| 1. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP |
![]() |
Using a screwdriver, detach the 4 claws and remove the cover.
![]() |
Remove the 2 screws and assist grip.
| 2. REMOVE DOOR INSIDE HANDLE BEZEL |
![]() |
Using a screwdriver, detach the 4 claws and remove the bezel.
| 3. REMOVE LUGGAGE COMPARTMENT DOOR COVER |
![]() |
Using a clip remover, remove the 10 clips and cover.
| 4. REMOVE LUGGAGE DOOR LOCK OPENER ASSEMBLY |
![]() |
Remove the screw and door lock opener.
| 5. REMOVE LUGGAGE DOOR CLOSER ASSEMBLY |
![]() |
Disconnect the connector.
Remove the 2 bolts and door closer.
| 6. REMOVE LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY |
![]() |
Disconnect the connector.
Remove the 2 nuts and lock cylinder.
| 7. REMOVE LUGGAGE DOOR OPENING SWITCH ASSEMBLY |
![]() |
Disconnect the connector.
![]() |
Remove the 2 screws and opening switch.
| 8. REMOVE REAR SPOILER SUB-ASSEMBLY |
![]() |
Using a clip remover, remove the clip.
Remove the 4 nuts.
![]() |
Put protective tape around the spoiler.
Insert a piano wire between the vehicle body and spoiler.
Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the spoiler to the vehicle body.
| 9. REMOVE LUGGAGE COMPARTMENT DOOR SUPPORT ASSEMBLY |
![]() |
Using a screwdriver, remove the clip and support from the door side.
Using a screwdriver, remove the clip and support from the vehicle body side.
Remove the support.
| 10. REMOVE TELEVISION CAMERA ASSEMBLY |
![]() |
Disconnect the television camera connector.
Detach the television camera connector clamp.
Remove the 2 nuts and television camera.
| 11. REMOVE REAR LIGHT ASSEMBLY |
![]() |
Disconnect the connector.
Remove the 3 nuts and light.
Remove the light bulb from the light socket and wire.
Remove the gasket.
| 12. REMOVE LICENSE PLATE LIGHT ASSEMBLY |
![]() |
Disconnect the connector.
![]() |
Remove the screw and license plate light from the luggage compartment door.
| 13. REMOVE LUGGAGE COMPARTMENT DOOR GARNISH SUB-ASSEMBLY OUTSIDE |
![]() |
Remove the 3 nuts.
![]() |
Detach the 7 clips and remove the garnish.
| 14. REMOVE LUGGAGE COMPARTMENT FLOOR MAT |
![]() |
Remove the floor mat.
| 15. REMOVE LUGGAGE NO. 1 COMPARTMENT LIGHT ASSEMBLY |
![]() |
Using a screwdriver, detach the claw and remove the light.
Disconnect the connector.
| 16. REMOVE TOOL BOX |
![]() |
Remove the tool box.
| 17. REMOVE REAR FLOOR FINISH PLATE |
![]() |
Remove the 2 bolts and 2 hooks.
Remove the 3 clips labeled A.
Detach the 4 clips to remove the finish plate.
| 18. REMOVE LUGGAGE COMPARTMENT TRIM COVER FRONT |
![]() |
Detach the hook.
![]() |
Remove the rope hook.
![]() |
Detach the 4 claws and remove the trim cover.
| 19. REMOVE LUGGAGE COMPARTMENT TRIM COVER INNER LH |
![]() |
Remove the bolt and hook.
Remove the 3 clips and trim cover.
| 20. REMOVE LUGGAGE COMPARTMENT TRIM COVER INNER RH |
![]() |
Remove the bolt and the hook.
Remove the 3 clips and trim cover.
| 21. REMOVE LUGGAGE COMPARTMENT DOOR STRIKER ASSEMBLY |
![]() |
Disconnect the striker connector.
Remove the 2 bolts and striker.