HOOD SUPPORT ROD > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedures for the RH side and LH side.
  2. The procedures listed below are for the LH side.



1. REMOVE HOOD SUPPORT ROD


B106662

  1. Using a screwdriver, remove the clip and support from the hood side.

    HINT:
    1. Tape the screwdriver tip before use.
    2. Remove the support while supporting the hood with one hand.

  1. Using a screwdriver, remove the clip and support from the vehicle body side.

    HINT:
    1. Tape the screwdriver tip before use.
    2. Remove the support while supporting the hood with one hand.



    B109916

  1. Remove the 2 bolts and hood support.

    HINT:
    Remove the hood support while supporting the hood panel with one hand.