VVT SENSOR > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE V-BANK COVER


A103946

  1. Remove the 2 nuts and V-bank cover.



3. REMOVE VVT SENSOR (for Intake Side of Bank 1)


    A106636

  1. Disconnect the sensor connector.

  1. Remove the bolt and sensor.



4. REMOVE VVT SENSOR (for Exhaust Side of Bank 1)


    A106633

  1. Disconnect the sensor connector.

  1. Remove the bolt and sensor.



5. REMOVE VVT SENSOR (for Intake Side of Bank 2)


    A106631

  1. Disconnect the sensor connector.

  1. Remove the bolt and sensor.



6. REMOVE VVT SENSOR (for Exhaust Side of Bank 2)


    A106632

  1. Disconnect the sensor connector.

  1. Remove the bolt and sensor.