POWER WINDOW CONTROL SYSTEM > DATA LIST / ACTIVE TEST

for Preparation Click here



READ DATA LIST

HINT:
Using the intelligent tester's Data List allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the Data List early in trouble shooting is one way to save time.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Read the Data List.


Multiplex network master switch assembly: 
Item
Measurement Item/ Display (Range)
Normal Condition
Diagnosis Note
Door P/W Auto SW
Driver side power window auto UP/DOWN switch signal/
ON or OFF
ON: Driver side power window auto UP/DOWN switch on master switch operated
OFF: Driver side power window switch on master switch not operated
-
Door P/W Up SW
Driver side power window auto UP/DOWN switch signal/
ON or OFF
ON: Driver side power window manual UP switch on master switch operated
OFF: Driver side power window switch on master switch not operated
-
Door P/W Down SW
Driver side power window manual DOWN switch signal/
ON or OFF
ON: Driver side power window manual DOWN switch on master switch operated
OFF: Driver side power window switch on master switch not operated
-
P Door P/W Auto SW
Front passenger side power window remote auto UP/DOWN switch signal/
ON or OFF
ON: Front passenger side power window remote auto UP/DOWN switch on master switch operated
OFF: Front passenger side power window switch on master switch not operated
-
P Door P/W Up SW
Front passenger side power window remote manual UP switch signal/
ON or OFF
ON: Front passenger side power window manual UP switch on master switch operated
OFF: Front passenger side power window switch on master switch not operated
-
P Door P/W Down SW
Front passenger side power window remote manual DOWN switch signal/
ON or OFF
ON: Front passenger side power window remote manual UP switch on master switch operated
OFF: Front passenger side power window switch on master switch not operated
-
Rr Door P/W Auto SW
Rear power window RH remote auto UP/DOWN switch signal/
ON or OFF
ON: Rear power window RH remote auto UP/DOWN switch on master switch operated
OFF: Rear power window RH switch on master switch not operated
-
Rr Door P/W Up SW
Rear power window RH remote manual UP switch signal/
ON or OFF
ON: Rear power window RH remote UP switch on master switch operated
OFF: Rear power window RH switch on master switch not operated
-
Rr Door P/W Down SW
Rear power window RH remote manual DOWN switch signal/
ON or OFF
ON: Rear power window RH manual DOWN switch on master switch operated
OFF: Rear power window RH switch on master switch not operated
-
Rl Door P/W Auto SW
Rear power window LH remote auto UP/DOWN switch signal/
ON or OFF
ON: Rear power window LH auto UP/DOWN switch on master switch operated
OFF: Rear power window LH switch on master switch not operated
-
Rl Door P/W Up SW
Rear power window LH remote manual UP switch signal/
ON or OFF
ON: Rear power window LH manual UP switch on master switch operated
OFF: Rear power window LH switch on master switch not operated
-
Rl Door P/W Down SW
Rear power window LH remote manual DOWN switch signal/
ON or OFF
ON: Rear power window LH manual DOWN switch on master switch operated
OFF: Rear power window LH switch on master switch not operated
-
Power Window Lock SW
Power window LOCK switch signal
ON or OFF
ON: Power window LOCK switch pushed in
OFF: Power window LOCK switch not pushed in
-
Glass Position (Close - 1/4)
Margin for jam protection triggering force of window glass within range of fully closed to 1/4 open position
/OK or CAUTION
OK: Margin is sufficient during manual UP operation
CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position
-
Glass Position (1/4 - 2/4)
Margin for jam protection triggering force of window glass within range of 1/4 to 1/2 open position
/OK or CAUTION
OK: Margin is sufficient during manual UP operation
CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position
-
Glass Position (2/4 - 3/4)
Margin for jam protection triggering force of window glass within range of 1/2 to 3/4 open position
/OK or CAUTION
OK: Margin is sufficient during manual UP operation
CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position
-
Glass Position (3/4 - Open)
Margin for jam protection triggering force of window glass within range of 3/4 to fully open position
/OK or CAUTION
OK: Margin is sufficient during manual UP operation
CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position
-

Multiplex network body ECU (Cowl side junction block RH) 
Item
Measurement Item/ Display (Range)
Normal Condition
Diagnostic Note
D Dor Cty SW
Driver side door courtesy switch signal/
ON/OFF
ON: Driver door is opened
OFF: Driver door is closed
-

PERFORM ACTIVE TEST

NOTICE:
Be careful to avoid injuries as this test causes vehicle parts to move.

HINT:
Performing the intelligent tester's Active Test allows relay, VSV, actuator, and other items to be operated without removing any parts. Performing the Active Test early in troubleshooting is one way to save time. The data list can be displayed during the Active Test.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Performing the Active Test by following the directions on the tester screen.


Multiplex network master switch assembly: 
Item
Test Details
Diagnostic Note
Power window
UP/OFF (OFF)
-
Power window
DOWN/OFF (OFF)
-

Multiplex network switch: 
Item
Test Details
Diagnostic Note
Power window
DOWN/OFF (OFF)
-
Power window
UP/OFF (OFF)
-