DTC    U0100    Lost Communication with ECM/PCM "A"

DTC    U0101    Lost Communication with TCM

DTC    U0122    Lost Communication with Vehicle Dynamics Control Module

DTC    U0126    Lost Communication with Steering Angle Sensor Module

DTC    U0130    Lost Communication with VGRS

DTC    U0132    Lost Communication with Ride Level Control Module

for Preparation Click here


DESCRIPTION

  1. The absorber control ECU inputs signals from the ECM, skid control ECU, steering control ECU and steering angle sensor via CAN communication.
  2. When DTCs indicating a CAN communication system malfunction are output, repair the CAN communication system first.

INSPECTION PROCEDURE

1.CHECK DTC
  1. Check DTC (Click here).

  1. Record the output DTC (DTC of AVS system).


NEXT

GO TO CAN COMMUNICATION SYSTEM