SEAT MEMORY SWITCH > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedures for the RH and LH side.
  2. A bolt without a torque specification is shown in the standard bolt chart (Click here).



1. INSTALL SEAT MEMORY SWITCH


B109935

  1. Install the switch with the 2 screws.

  1. Connect the connector.



2. INSTALL FRONT DOOR TRIM COVER LH


B105998E01

  1. Connect the 2 cables to the inside handle.

  1. Attach the 9 clips and install the trim cover.



    B106003E01

  1. Attach the 2 claws to install the trim lower cover.

  1. Install the screw.



3. INSTALL DOOR INSIDE HANDLE BEZEL


B105997E01

  1. Attach the 3 claws to install the bezel.