FUEL LID OPENER SYSTEM > DATA LIST / ACTIVE TEST

for Preparation Click here



READ DATA LIST

HINT:
Using the intelligent tester's Data List allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the Data List early in troubleshooting is one way to save time.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Read the Data List on the tester's screen.

    Integration control and panel assembly: 
    Item
    		Measurement Item / Display (Range)
    		Normal Condition
    		Diagnostic Note
    FUEL Lid Opn SW
    		Fuel lid opener switch signal/ ON or OFF
    		ON: Fuel lid opener switch is pushed
    OFF: Fuel lid opener switch is not pushed
    		-


PERFORM ACTIVE TEST

HINT:
Performing the intelligent tester's Active Test allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the Active Test early in troubleshooting is one way to save time. The Data List can be displayed during the Active Test.

  1. Connect the intelligent tester to the DLC3

  2. Turn the engine switch on (IG).

  3. Perform the Active Test according to the display on the tester.

    Cowl side junction block ECU LH 
    Item
    		Test Details
    		Diagnostic Note
    FUEL Lid Open
    		Operate fuel lid opener motor
    OFF/ON
    		-