LUGGAGE COMPARTMENT DOOR > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT LUGGAGE COMPARTMENT DOOR PANEL SUB-ASSEMBLY


  1. Check that the clearance measurements of areas A to C are within the standard range.


    B107117E01

    Standard clearance:
    Area
    		Measurement
    A
    		4.0 +- 1.5 mm (0.157 +- 0.059 in.)
    B (Reference)
    		1.5 +- 1.5 mm (0.059 +- 0.059 in.)
    C (Reference)
    		4.0 +- 1.5 mm (0.157 +- 0.059 in.)